|
AITM 2.0007 - Determination of specific optical smoke density
ASTM C542 - Flame propagation
ASTM C1166 - Flame propagation
ASTM D56 - Flash point by tag closed tester
method
ASTM D93 - Close cup flash point
ASTM D229 - Method 1 - Burning rate, Method 2 -
flame resistance
ASTM D635 - Burning rate in vertical position
ASTM D1929 - Self and flash ignition
temperatures
ASTM D2584 - Ignition loss of cured reinforced
resins
ASTM D2843 - Smoke density from the burning or
decomposition of plastics
ASTM D2859 - Flammability of finished textile floor covering
materials (methenamine pill)
ASTM D2863 - Limiting oxygen index (LOI)
ASTM D3014 - Flame height, burning time, loss
of weight for plastics
ASTM D3065 - Flammability of aerosol products
ASTM D3675 - Surface flammability of flexible
cellular materials
ASTM D3801 - Comparative extinguishing
characteristics of solid plastics in a vertical position
ASTM D3874 - Ignition of materials by hot wire
sources
ASTM D4804 - Flammability characteristics of non-rigid solid
plastics (Methods A and B)
ASTM E84 - Surface flammability characteristics
of building materials
ASTM E136 - Behavior of materials in a vertical
tube furnace
ASTM E162 - Flame spread using a radiant panel
ASTM E603 - Full scale room burn test
ASTM E648 - Critical heat flux of floor
coverings using a radiant panel
ASTM E659 - Auto ignition temperature of liquid
chemicals (AIT)
ASTM E662 - Optical smoke density
ASTM E681 - Flammability (explosion) limits of
chemicals (UEL, LEL)
ASTM E800 - HCN, Hydrogen Cyanide measurement
using the colorimetric method
ASTM E906 - Heat and visible smoke release
rates
ASTM E1317 - LIFT - Lateral flame spread
ASTM E1321 - Material ignition and flame spread
properties
ASTM E1354 - Cone Calorimeter
ASTM E2058 (FM 4910)
Screening Test- Screening test for
clean room test
ASTM F814 - Smoke density for aerospace
applications
AITM 2.0005 (7.1.6) 60 degree flammability
AITM 2.0008 (7.3.3) Optical smoke density
AITM 3.0005 (7.4) Toxicity
ATS 1000.001 - Flammability, smoke, toxicity,
and heat release
BELLCORE GR-63-CORE - Telecommunications
equipment fire resistance
BIFMA X5.7 - Furniture flammability
BMS 13-48 - Smoke and toxicity
BSS 7230 - Flammability testing of aircraft
materials to FAR Part 25, Appx F, Part 1
BSS 7322 - Determination of heat release using
OSU
BSS 7324 - 60 degree flammability, smoke, and toxicity
BSS 7238 - Optical smoke density
BSS 7239 - Toxic gas generation
CAL 106 - Resistance of a mattress or mattress pad to
combustion from smoldering cigarettes
CAL 116 - Cigarette test of upholstered furniture
CAL 117, Sect A, Part I - Flame retardance of resilient
filling materials used in upholstered furniture
CAL 117, Sect D, Part II - Cigarette smoldering screening test
for bedding
CAL 121 - Flammability test procedure for mattresses in high
risk occupancies
CAL 129 - Flammability test procedure for mattresses for use
in public buildings
CAL 133 - Flammability test procedure for seating furniture
for use in public occupancies
CFR vol. 16, 1610 - Std. for the flammability
of clothing textiles (45 deg. angle test)
CFR vol. 16, 1632.4 - Mattress flammability
CPAI 84 - Tent fabric flammability
DIN 4102, Part 1, Class A1 - Ignition (only)
DOT 173.338-18(b)(7) -Flammability using a red
hot platinum wire
FAA/FAR 25.853 - Flammability tests
FAA/FAR 25.855 - Flammability tests
FED STD 191A, Method 5903.1 - Flammability of
cloth in a vertical direction
FED STD 191A, Method 5903.2 - Flammability of
cloth in a vertical direction
FMVSS302 - Automotive interior flammability
HALOGEN CONTENT - Determination of the halogen
content level
IEC 331 - Fire characteristics of electrical
cables
IEC 332-1 - Single wire/cable flame propagation
IEC 332-3 - Wire/cable bunch flame propagation
IEC 695-2-2 - Fire hazard testing; needle flame test
IEC 754-1 - Evolved combustion gases of
wire/cable
IEC 754-2 - Acid gas
IEC 1034 (1,2) - Smoke density of wire/cable
IEC 60754-2 - Acid gas content
IEEE 383 - Cable tray flame spread
IEEE 45 - Cable tray flame spread
IMO A.652(16) - Upholstered furniture
flammability test
IMO A.653(16) - LIFT - Flammability of marine
surface finishes
IMO MSC 41 (64) - Smoke & toxicity products of combustion
ISO 4589-2 - Determination of burning behavior by oxygen index
ISO 5660 - Cone Calorimeter
ISO 9705 - Room burn facility and modified (1/2
scale and 1/4 scale) room burn
MIL 2031 - Fire/Toxicity tests for composites
used in submarines
MIL C-24643 - Acid gas content
Mobil 45 deg - Flammability test calculating weight loss for
rigid urethane foams
MSC.41(64) - Smoke and toxicity products of
combustion
NES 711 - Smoke
NES 713 - Toxicity
NES 715 - Temperature Index
NFPA 225 - Surface flammability characteristics
of building materials
NFPA 258 - Optical smoke density
NFPA 264A - Cone calorimeter
NFPA 701 - Flame resistant textiles and fibers
NFPA 1971 - Flame resistance of cloth in a
vertical direction (Fed. Std. 191A, Method 5903.1)
Pittsburgh Protocol - Toxicity of thermal degradation products
Room Burn Facility - UBC 42-2, ANSI
Room Flammability Tests - 12'x12'x12'
(adjustable ceiling height)
SMP 800-C (Modified) - Combustion toxicity
UL 94 V Series - Vertical flammability
UL 94 HF Series - Horizontal flammability
UL 214 - Flame propagation of fabrics and films
UL 723 - Surface flammability characteristics
of building materials
UBC 8-2 - Full scale room burn test
ULVW I - Vertical wire flame test
|
